Technical data
Product description
Frames constitute the primary load-bearing components after the scaffold is erected, and comprise two standards (uprights) connected by horizontal bars.
Steel frames of tFrame PIN74 com in the standard system width of 739 mm and four heights, where a 2.0 m high frame is the primary frame, and the other are mostly used at lower scaffold levels for levelling out in sloped terrain, to match the scaffold structure to the building envelope, and in scaffolds where girders are used, or in various non-standard setups.
Standards of the frame (uprights) are made of tubes with outer diameter of 48.3 mm, 2.7 mm in wall thickness, made of heavy duty S235 (Re > 320 MPa) structural steel.
There are studs on the top ends, made of tubes with outer diameter of 38 mm, used for the erection of the next level’ s frames vertically.
The bottom bar of the frame (with a pin for the installation of the toeboard in 150 and 200 frames) stiffens the structure and provides protection against accidental raising of the scaffold decking.
The upper bar has 8 star pins for deck mounting. The structure of the frame ensures mounting of guardrails (except 50 and 100 frames) and diagonal braces.